|
The Albatross
EXPERT
3000 PSI Cleaning Gun Kit
(Item ID# ALB 64021070)
THIS KIT INCLUDES (1) ALBATROSS
EXPERT 3000
PSI SPOT CLEANING GUN AND (1) GALLON OF
ALBATROSS
SUPERKLEEN S.P.I.F.
CURED
INK REMOVER.
The Albatross
EXPERT
3000 PSI SPOT CLEANING GUN
 A
high quality spot cleaning gun with a large capacity canister
and brass pump cylinder. Lightweight yet durable. Furnishes
3000 PSI of strong cleaning pressure. More gun pressure
means that you'll be buying less cleaning fluid and using less
cleaning fluid! The gun's plastic housing offers both rust
and shock protection. An adjustable spray nozzle permits
easy flow rate control to either fan away stains, or,
concentrate and focus pressure on them. Air vented housing
keeps the gun cool during use.
The EXPERT
3000 PSI spot cleaning gun is designed for
intermittent use applications on all fabric materials, from
delicate silks and polyesters to wools and tight wovens. This gun is best
used
with Albatross
or EXPERT
cleaning solvents as they are non-flammable and
work well with the pump's mechanism. Do use this cleaning gun in a
well-
ventilated area. DO NOT...fill the gun's large capacity canister with
water,
flammable or corrosive liquids. The gun is available as either
110-20V, 60 Hz.
or 220-40V, 50 Hz..
 Here's
a great accessory to use with the EXPERT
3000 PSI
Spot Cleaning Gun...the Albatross
Gun Reel.
The gun reel conveniently suspends the Albatross
spot
cleaning gun over the cleaning surface for safer handling and
faster operation. The height of the spot cleaning gun, and the
cable tension, are adjustable to suit the user's needs. Pairing
the gun reel up with an Albatross
spot cleaning gun diminishes
spot gun breakage; relieves the user of the burden of the
spot gun's weight and keeps the spot gun "ready-to-go" at all times.
CONTACT
OUR CUSTOMER SERVICE DEPARTMENT FOR PRICES, ORDERING AND DELIVERY
INFORMATION FOR THIS ITEM.
AlbatrossSuperkleen
S.P.I.F.Cured
Ink Remover
 A
clear, colorless liquid solvent with a mild odor. Removes flock
lettering, adhesives, cured plastisol inks and most oil based and
water based inks from textiles. Eradicates ink smudges caused
by finger prints or marks left on the screen during the screen
printing process.
Leaves no chemical solvent "ring" behind on spot
cleaned fabric.
Supplied at full strength with no petroleum hydrocarbon "fillers".
Just a minimum amount does the job every time. High solvency
and fast evaporation rates. For best results, Albatross
recommends that this
product be applied with an Albatross
spot cleaning gun.
Safety Notes About
SuperKleen
S.P.I.F.
Cured Ink Remover
* Does not contain...1,1,1 trichloroethane,
dichlorofluoroethane or any ozone depleting substances.
* Exempt from SCAQMD's rule #1171 and
1130.1.
* No flashpoint up to the boiling point.
* Does contain...methylene
chloride (also known as dichloromethane). Must be used in compliance with
OSHA's exposure standards.
Handling And Storage Notes
For SuperKleen
S.P.I.F.
Cured Ink Remover
* THIS PRODUCT IS STABLE UNDER
RECOMMENDED HANDLING AND STORAGE CONDITIONS.
* Try to keep quantities stored to as
small of an amount as possible.
* Store in a cool, dry, well-ventilated
area away from all sources of ignition and incompatible materials.
* Storage area should be clearly
identified; free of all obstructions and accessible only to trained and
authorized personnel.
* Inspect containers periodically for
damage or leaks. Keep containers tightly closed when not in use.
* When transferring Superkleen
S.P.I.F.,
use caution when opening container cap. Avoid inhalation of vapors.
Avoid contact with skin, eyes and clothing. Wash thoroughly after
handling.
* Not considered flammable, but may be
ignited by heat, sparks, open flames or other sources of ignition (i.e. pilot
lights, static electricity or mechanical/electrical equipment). Bond and
ground containers, hoses and piping when transferring this product.
* Forms a combustible and/or explosive
mixture with air and/or oxygen; strong acids or bases; oxidizing
agents; selected amines; zinc; aluminum; alkali metals;
halogens; anhydrides; isocyanates; organometallic
contaminants; acetaldehyde; chlorine; ethylene oxide and
hydrogen peroxide.
* Do not pour this product down the
drain or dump it where it can affect ground or surface waters.
|
